How to Install a Faucet Supply Line: A Comprehensive Guide

Welcome to our step-by-step guide on installing a braided stainless steel faucet supply line! Whether you’re a seasoned DIY enthusiast or a newbie to home improvement projects, this guide will walk you through the process with clarity and precision. Let’s dive in!

Step 1: Gather Your Tools

Before starting, make sure you have all the necessary tools handy. You’ll need an adjustable wrench, Teflon tape, a bucket, and of course, your new braided stainless steel supply line.

Step 2: Turn Off the Water

Locate the shut-off valves under the sink and turn them off. Turn on the faucet to drain any remaining water in the lines.

Step 3: Remove the Old Supply Line

Using an adjustable wrench, carefully disconnect the old supply line from both the faucet and the shut-off valves. Have a bucket ready to catch any water that may drip out.

Step 4: Install the New Supply Line

Apply Teflon tape to the threads of the faucet and the shut-off valve. Connect one end of the braided stainless steel supply line to the faucet and the other end to the shut-off valve. Hand-tighten first, then use the wrench to secure the connections.

Step 5: Turn On the Water and Check for Leaks

Once everything is connected, gradually turn on the water and check for any leaks. If you notice any leaks, tighten the connections further until they stop.

Congratulations! You’ve successfully installed a braided stainless steel faucet supply line. Enjoy your new, leak-free setup!