Step-by-Step Guide to Replacing a Single Hole Faucet

Replacing a single hole faucet is a common DIY task that can give your kitchen or bathroom a whole new look. Whether you’re updating your space or fixing a leak, this guide will walk you through the process.

Tools and Materials You’ll Need:

• Adjustable wrench
• Plumber’s putty
• Silicone sealant
• New faucet
• Rag
• Bucket

Step 1: Gather Your Tools and Materials

Before you begin, make sure you have all the necessary tools and materials. A new faucet should come with installation instructions, so be sure to read those as well.

Step 2: Shut Off the Water Supply

Locate the shut-off valves under the sink and turn them clockwise to shut off the water supply. Open the faucet to release any remaining water in the lines.

Step 3: Remove the Old Faucet

Use an adjustable wrench to disconnect the supply lines from the faucet. Remove the mounting nuts and any other attachments holding the faucet in place.

Step 4: Install the New Faucet

Apply plumber’s putty or silicone sealant around the base of the new faucet. Insert the faucet into the mounting holes and secure it in place with the provided hardware.

Step 5: Reconnect the Supply Lines

Reconnect the supply lines to the new faucet, making sure they are tight and secure. Turn on the water supply and check for any leaks.

Step 6: Test the Faucet

Turn on the faucet and check for proper functionality. Make sure both hot and cold water are flowing smoothly and adjust as needed.

By following these steps, you can easily replace a single hole faucet in your kitchen or bathroom. Enjoy your refreshed space!